- NAME
- SYNOPSIS
- DESCRIPTION
- OVERVIEW
- Utility Functions
- OVERVIEW OF CLASSES
- SV-RELATED CLASSES
- B::SV Methods
- B::IV Methods
- B::NV Methods
- B::RV Methods
- B::PV Methods
- B::PVMG Methods
- B::MAGIC Methods
- B::PVLV Methods
- B::BM Methods
- B::GV Methods
- B::IO Methods
- B::AV Methods
- B::CV Methods
- B::HV Methods
- OP-RELATED CLASSES
- B::OP Methods
- B::UNOP METHOD
- B::BINOP METHOD
- B::LOGOP METHOD
- B::LISTOP METHOD
- B::PMOP Methods
- B::SVOP METHOD
- B::PADOP METHOD
- B::PVOP METHOD
- B::LOOP Methods
- B::COP Methods
- AUTHOR
NAME
B - The Perl Compiler
SYNOPSIS
use B;
DESCRIPTION
The B
module supplies classes which allow a Perl program to delve
into its own innards. It is the module used to implement the
"backends" of the Perl compiler. Usage of the compiler does not
require knowledge of this module: see the O module for the
user-visible part. The B
module is of use to those who want to
write new compiler backends. This documentation assumes that the
reader knows a fair amount about perl's internals including such
things as SVs, OPs and the internal symbol table and syntax tree
of a program.
OVERVIEW
The B
module contains a set of utility functions for querying the
current state of the Perl interpreter; typically these functions
return objects from the B::SV and B::OP classes, or their derived
classes. These classes in turn define methods for querying the
resulting objects about their own internal state.
Utility Functions
The B
module exports a variety of functions: some are simple
utility functions, others provide a Perl program with a way to
get an initial "handle" on an internal object.
Functions Returning B::SV
, B::AV
, B::HV
, and B::CV
objects
For descriptions of the class hierarchy of these objects and the methods that can be called on them, see below, "OVERVIEW OF CLASSES" and "SV-RELATED CLASSES".
- sv_undef
Returns the SV object corresponding to the C variable
sv_undef. - sv_yes
Returns the SV object corresponding to the C variable
sv_yes. - sv_no
Returns the SV object corresponding to the C variable
sv_no. - svref_2object(SVREF)
Takes a reference to any Perl value, and turns the referred-to value into an object in the appropriate B::OP-derived or B::SV-derived class. Apart from functions such as
main_root, this is the primary way to get an initial "handle" on an internal perl data structure which can then be followed with the other access methods.The returned object will only be valid as long as the underlying OPs and SVs continue to exist. Do not attempt to use the object after the underlying structures are freed.
- amagic_generation
Returns the SV object corresponding to the C variable
amagic_generation. - init_av
Returns the AV object (i.e. in class B::AV) representing INIT blocks.
- check_av
Returns the AV object (i.e. in class B::AV) representing CHECK blocks.
- begin_av
Returns the AV object (i.e. in class B::AV) representing BEGIN blocks.
- end_av
Returns the AV object (i.e. in class B::AV) representing END blocks.
- comppadlist
Returns the AV object (i.e. in class B::AV) of the global comppadlist.
- regex_padav
Only when perl was compiled with ithreads.
- main_cv
Return the (faked) CV corresponding to the main part of the Perl program.
Functions for Examining the Symbol Table
- walksymtable(SYMREF, METHOD, RECURSE, PREFIX)
Walk the symbol table starting at SYMREF and call METHOD on each symbol (a B::GV object) visited. When the walk reaches package symbols (such as "Foo::") it invokes RECURSE, passing in the symbol name, and only recurses into the package if that sub returns true.
PREFIX is the name of the SYMREF you're walking.
For example:
# Walk CGI's symbol table calling print_subs on each symbol. # Recurse only into CGI::Util:: walksymtable(\%CGI::, 'print_subs', sub { $_[0] eq 'CGI::Util::' }, 'CGI::');
print_subs() is a B::GV method you have declared. Also see "B::GV Methods", below.
Functions Returning B::OP
objects or for walking op trees
For descriptions of the class hierarchy of these objects and the methods that can be called on them, see below, "OVERVIEW OF CLASSES" and "OP-RELATED CLASSES".
- main_root
Returns the root op (i.e. an object in the appropriate B::OP-derived class) of the main part of the Perl program.
- main_start
Returns the starting op of the main part of the Perl program.
- walkoptree(OP, METHOD)
Does a tree-walk of the syntax tree based at OP and calls METHOD on each op it visits. Each node is visited before its children. If
walkoptree_debug(see below) has been called to turn debugging on then the methodwalkoptree_debugis called on each op before METHOD is called. - walkoptree_debug(DEBUG)
Returns the current debugging flag for
walkoptree. If the optional DEBUG argument is non-zero, it sets the debugging flag to that. See the description ofwalkoptreeabove for what the debugging flag does.
Miscellaneous Utility Functions
- ppname(OPNUM)
Return the PP function name (e.g. "pp_add") of op number OPNUM.
- hash(STR)
Returns a string in the form "0x..." representing the value of the internal hash function used by perl on string STR.
- cast_I32(I)
Casts I to the internal I32 type used by that perl.
- minus_c
Does the equivalent of the
-ccommand-line option. Obviously, this is only useful in a BEGIN block or else the flag is set too late. - cstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string in C source code.
- perlstring(STR)
Returns a double-quote-surrounded escaped version of STR which can be used as a string in Perl source code.
- class(OBJ)
Returns the class of an object without the part of the classname preceding the first
"::". This is used to turn"B::UNOP"into"UNOP"for example. - threadsv_names
In a perl compiled for threads, this returns a list of the special per-thread threadsv variables.
OVERVIEW OF CLASSES
The C structures used by Perl's internals to hold SV and OP
information (PVIV, AV, HV, ..., OP, SVOP, UNOP, ...) are modelled on a
class hierarchy and the B
module gives access to them via a true
object hierarchy. Structure fields which point to other objects
(whether types of SV or types of OP) are represented by the B
module as Perl objects of the appropriate class.
The bulk of the B
module is the methods for accessing fields of
these structures.
Note that all access is read-only. You cannot modify the internals by using this module. Also, note that the B::OP and B::SV objects created by this module are only valid for as long as the underlying objects exist; their creation doesn't increase the reference counts of the underlying objects. Trying to access the fields of a freed object will give incomprehensible results, or worse.
SV-RELATED CLASSES
B::IV, B::NV, B::RV, B::PV, B::PVIV, B::PVNV, B::PVMG, B::BM, B::PVLV, B::AV, B::HV, B::CV, B::GV, B::FM, B::IO. These classes correspond in the obvious way to the underlying C structures of similar names. The inheritance hierarchy mimics the underlying C "inheritance". For 5.9.1 and later this is:
B::SV
|
+--------------+----------+------------+
| | | |
B::PV B::IV B::NV B::RV
\ / /
\ / /
B::PVIV /
\ /
\ /
\ /
B::PVNV
|
|
B::PVMG
|
+-----+----+------+-----+-----+
| | | | | |
B::BM B::AV B::GV B::HV B::CV B::IO
| |
B::PVLV |
B::FMFor 5.9.0 and earlier, PVLV is a direct subclass of PVMG, so the base of this diagram is
|
B::PVMG
|
+------+-----+----+------+-----+-----+
| | | | | | |
B::PVLV B::BM B::AV B::GV B::HV B::CV B::IO
|
|
B::FMAccess methods correspond to the underlying C macros for field access,
usually with the leading "class indication" prefix removed (Sv, Av,
Hv, ...). The leading prefix is only left in cases where its removal
would cause a clash in method name. For example, GvREFCNT
stays
as-is since its abbreviation would clash with the "superclass" method
REFCNT
(corresponding to the C function SvREFCNT
).
B::SV Methods
- REFCNT
- FLAGS
- object_2svref
Returns a reference to the regular scalar corresponding to this B::SV object. In other words, this method is the inverse operation to the svref_2object() subroutine. This scalar and other data it points at should be considered read-only: modifying them is neither safe nor guaranteed to have a sensible effect.
B::IV Methods
- IV
Returns the value of the IV, interpreted as a signed integer. This will be misleading if
FLAGS & SVf_IVisUV. Perhaps you want theint_valuemethod instead? - IVX
- UVX
- int_value
This method returns the value of the IV as an integer. It differs from
IVin that it returns the correct value regardless of whether it's stored signed or unsigned. - needs64bits
- packiv
B::NV Methods
B::RV Methods
B::PV Methods
- PV
This method is the one you usually want. It constructs a string using the length and offset information in the struct: for ordinary scalars it will return the string that you'd see from Perl, even if it contains null characters.
- RV
Same as B::RV::RV, except that it will die() if the PV isn't a reference.
- PVX
This method is less often useful. It assumes that the string stored in the struct is null-terminated, and disregards the length information.
It is the appropriate method to use if you need to get the name of a lexical variable from a padname array. Lexical variable names are always stored with a null terminator, and the length field (SvCUR) is overloaded for other purposes and can't be relied on here.
B::PVMG Methods
B::MAGIC Methods
- MOREMAGIC
- precomp
Only valid on r-magic, returns the string that generated the regexp.
- PRIVATE
- TYPE
- FLAGS
- OBJ
Will die() if called on r-magic.
- PTR
- REGEX
Only valid on r-magic, returns the integer value of the REGEX stored in the MAGIC.
B::PVLV Methods
B::BM Methods
B::GV Methods
- is_empty
This method returns TRUE if the GP field of the GV is NULL.
- NAME
- SAFENAME
This method returns the name of the glob, but if the first character of the name is a control character, then it converts it to ^X first, so that *^G would return "^G" rather than "\cG".
It's useful if you want to print out the name of a variable. If you restrict yourself to globs which exist at compile-time then the result ought to be unambiguous, because code like
${"^G"} = 1is compiled as two ops - a constant string and a dereference (rv2gv) - so that the glob is created at runtime.If you're working with globs at runtime, and need to disambiguate *^G from *{"^G"}, then you should use the raw NAME method.
- STASH
- SV
- IO
- FORM
- AV
- HV
- EGV
- CV
- CVGEN
- LINE
- FILE
- FILEGV
- GvREFCNT
- FLAGS
B::IO Methods
- LINES
- PAGE
- PAGE_LEN
- LINES_LEFT
- TOP_NAME
- TOP_GV
- FMT_NAME
- FMT_GV
- BOTTOM_NAME
- BOTTOM_GV
- SUBPROCESS
- IoTYPE
- IoFLAGS
- IsSTD
Takes one arguments ( 'stdin' | 'stdout' | 'stderr' ) and returns true if the IoIFP of the object is equal to the handle whose name was passed as argument ( i.e. $io->IsSTD('stderr') is true if IoIFP($io) == PerlIO_stdin() ).
B::AV Methods
- FILL
- MAX
- OFF
- ARRAY
- ARRAYelt
Like
ARRAY, but takes an index as an argument to get only one element, rather than a list of all of them. - AvFLAGS
B::CV Methods
- STASH
- START
- ROOT
- GV
- FILE
- DEPTH
- PADLIST
- OUTSIDE
- OUTSIDE_SEQ
- XSUB
- XSUBANY
For constant subroutines, returns the constant SV returned by the subroutine.
- CvFLAGS
- const_sv
B::HV Methods
OP-RELATED CLASSES
B::OP
, B::UNOP
, B::BINOP
, B::LOGOP
, B::LISTOP
, B::PMOP
,
B::SVOP
, B::PADOP
, B::PVOP
, B::LOOP
, B::COP
.
These classes correspond in the obvious way to the underlying C structures of similar names. The inheritance hierarchy mimics the underlying C "inheritance":
B::OP
|
+---------------+--------+--------+
| | | |
B::UNOP B::SVOP B::PADOP B::COP
,' `-.
/ `--.
B::BINOP B::LOGOP
|
|
B::LISTOP
,' `.
/ \
B::LOOP B::PMOPAccess methods correspond to the underlying C structre field names,
with the leading "class indication" prefix ("op_"
) removed.
B::OP Methods
These methods get the values of similarly named fields within the OP
data structure. See top of op.h
for more info.
- next
- sibling
- name
This returns the op name as a string (e.g. "add", "rv2av").
- ppaddr
This returns the function name as a string (e.g. "PL_ppaddr[OP_ADD]", "PL_ppaddr[OP_RV2AV]").
- desc
This returns the op description from the global C PL_op_desc array (e.g. "addition" "array deref").
- targ
- type
- opt
- static
- flags
- private
- spare
B::UNOP METHOD
B::BINOP METHOD
B::LOGOP METHOD
B::LISTOP METHOD
B::PMOP Methods
- pmreplroot
- pmreplstart
- pmnext
- pmregexp
- pmflags
- pmdynflags
- pmpermflags
- precomp
- pmoffset
Only when perl was compiled with ithreads.
B::SVOP METHOD
B::PADOP METHOD
B::PVOP METHOD
B::LOOP Methods
B::COP Methods
AUTHOR
Malcolm Beattie, mbeattie@sable.ox.ac.uk
